Hi,
I have a 1996 323f 1.5 GLX and I was fed up of not having remote locking like my last car so I bought a Microscan SCL3000 keyfob thing that can attach to the central locking. I have looked at the guides and think I know which wires to connect but I have no idea were to look for the relays on the car. Does anyone know were the central locking is located in the car? Also do you know if the Haynes manual that says 323 but not 323f actually covers the fastback?

Thanks for your help

Mike

My Haynes manual is called "323 & Protege" and does cover the fastback (i.e. 323F) - only problem is it's American spec so the dashboard and stuff is backwards ...

I fitted a Sparkrite alarm unit to mine and then added on the Central door locking interface.
I phoned sparkrite and they said that the open/close wires linked to the central locking on the car could be found behind the lower kick panel on the passenger side on the car. The wires that you need to look for are green/red and green/white. I attached the wires from the interface and it all works fine.
I expect that it should be the same for all alarms. Hope this is some help, let me know if you need any more info.

Just out of interest - I have a Cat4 Wolfguard alarm (SA Manufacturer) with a two stage remote locking interface - press once to open the driver's door and a second time to unlock the rest - does yours do this too ?

When I press the remote all doors open at the same time and then press the same button again and they all lock. It is a simple alarm but it was easy to fit and works well.

Thanks for your help, hopefully I'll have the time to do the work.

cheers