Aftermarket fogs

**Posted:** Wed Nov 03, 2004 7:42 pm

Anyone fitted some front fogs on the 323f? I think the wiring is all there just needs the lights and switch fitting.

There isn't any V6s in the breakers at the minute, so can you could probably use another rear fog switch instead (turn it upside down or something lol)?

**Posted:** Wed Nov 03, 2004 11:23 pm

yeh but you need to take off your front bumper and all the wires are there for the switch i went to mazda £15 which i thought was gd? the wires to like to the lights itself are underneath the headlights which will need to be removed!
thanks
Lee

**Posted:** Wed Nov 03, 2004 11:41 pm

wow sounds easy. I got my own fogs look nice but havn't put them in yet. Is it really that easy? I got a switch too but havn't fitted that yet either.

**Posted:** Wed Nov 03, 2004 11:48 pm

yeh pretty much that was vry brief but yeh thats it the switch goes in perfectly and quickly it take longer to get the flipin blank off than it does puttin the new one in. i used my own fogs to i just cut mazdas connections off nad put on some spade connectors. mine need to be aimed tho :shock:

so thats a job for me an ma boy on da weekend ATM they light the interior of people in fronts car bit high me thinks lol
thanks
Lee

**Posted:** Wed Nov 03, 2004 11:55 pm

I presume then that you didn't have to take the front bumper off...

**Posted:** Thu Nov 04, 2004 2:37 am

sounds easy enuf but im not sure hopefully i find a nice set of the originals at a scrappy

u reackon the connectors are the same then?

**Posted:** Thu Nov 04, 2004 4:08 am

If you want mazda ones I think you gotta take off the front bumper to fit them in, correct me if I'm wrong.

I found some nicer ones anyway

**Posted:** Thu Nov 04, 2004 8:58 am

[quote="NINJAADAM39"]I presume then that you didn't have to take the front bumper off...

[/quote]

Pretty sure you'll need to take the front bumper off to get to the foglight wires. Easy enough job - just remember where all the screws go. The first time I did it I had two screws left over! - until about 10 months later when we took Shaggy's front bumper off and I found out where the screws went!!

Mark

**Posted:** Thu Nov 04, 2004 9:40 am

So am i right in saying that although there are no foglights, the wiring is all there, form the front bumper to the blanking plate in the cockpit?

**Posted:** Thu Nov 04, 2004 11:02 am

you are perfectly correct!! I used me wiring diagram from me haynes manual (after taking the bumper off) and then installed a switch I got from a 626 and now I have four foglights!! WHO-HOO!!

Check them out on the CARS section under Danny Sunley

Aftermarket fogs

Who is online