Strut Braces, Sway bars, camber adjusters, caster adjusters.

**Posted:** Sun Jan 09, 2005 12:51 pm

For anyone who is interested in getting any of the below whiteline gear you can buy them from [url=http://www.powerstation.org.uk]Power Station[/url], [url=http://www.demon-tweeks.co.uk/]Demon Tweaks[/url] or [url=http://www.rallynuts.com/]Rallynuts[/url].

Front strut Brace (sits on top of your suspension mounts)
Rear strut Brace (sits on top of your suspension mounts)
Rear sway bar (also known as anti rolls bars. Found underneath the car),
Camber adjusters
Caster adjusters.
Uprated bushes.

or you can buy prosuspension Camber adjusters from [url]http://stores.ebay.com/Prosuspension_W0QQssPageNameZVIStoreHeaderLinksQQtZkm?[/url]

**Posted:** Sun Jan 09, 2005 12:52 pm

Do they make a difference??

Well i have the whiteline front strut brace and rear swaybar and yes they do make a noticable difference!

**Posted:** Sun May 15, 2005 4:24 pm

Demon Tweaks dont have any strut braces listed for a 323f

**Posted:** Sun May 15, 2005 4:41 pm

You'll have to phone them, or tell them its a lantis/astina (as its known in Oz).

I got mine from them after checking out www.whiteline.com.au and finding the part i needed.

Joe

:wink:

**Posted:** Tue May 17, 2005 9:09 pm

Whats happening re this group buy by the way...

**Posted:** Wed May 18, 2005 10:53 am

as far as I know it's not going ahead.

Mark

**Posted:** Thu Oct 05, 2006 11:37 am

I'm working on a groupbuy for the sway-bar in this topic: [url]http://www.club323f.com/club323f/forum/viewtopic.php?t=11270[/url]

Greetz

**Joined:** Mon Mar 09, 2009 7:34 pm **Posts:** 44

I put new alloys on my car 2 weeks ago and the front passenger tyre in nw bald on the outside. the same happened with my old alloys. I replaced the wishbone, strut, steering rack and all the joints. so what else can it be? plus car was lined and balance with the new wheels?

**Posted:** Sun Mar 22, 2009 11:57 pm

track rod ends then get the tracking done again. I had the exact same problem.

**Joined:** Mon Mar 09, 2009 7:34 pm **Posts:** 44

i already replaced them both 3 times, and they are solid same with the bottom ball joints. i really need help, i done what the mechanics told me but it still ate the new tyre in that short amount of time

**Posted:** Wed Apr 29, 2009 8:05 am

dont go so fast around round-a-bouts? :blackeye:

**Posted:** Wed Sep 26, 2012 12:55 pm

Sorry to post a messages years later, but most websites have no strut bar / sway bar for the 323F

**Posted:** Tue Jul 04, 2023 3:38 pm

I've been looking forward to putting a front strut brace (scavenged from a V6) on my 1.5 BA and finally got round to bolting it on
[img]https://i.imgur.com/WCfH6yAl.jpg[/img]

Driving the car it sounds a lot noisier - I wonder if the bar is acting as a resonator

Then I spotted metal shavings

[img]https://i.imgur.com/WmtSKXbl.jpg[/img]

I think the noise is because the top of that aluminium chamber is rubbing against the bar. Oh dear, I probably need to try a few shim washers to stop it touching. I know a 1.5 is never going to have the performance to notice any difference with a strut, but it's one more reason to smile when driving about.

[img]https://i.imgur.com/7BFw2Gfl.jpg[/img]

Strut Braces, Sway bars, camber adjusters, caster adjusters.

Who is online