Hi all,
I have changed ATF recently (by machine) but my car still jerking. Normally this happen in the way like difficult to change from gear 1 to gear 2 and will jerk immediately after gear changed. Same thing to my reverse, the car will jerk if i pressure the pedal right after i change to "R" unless i give a second or two delay. My transmission is auto and clock 73000 KM. Advice needed urgently.

Thanks

Time for a tune up

If it jerks, more likely the clutch??

Probably the pressure plates are failing?

its auto a???

Must read threads properly lol

lol, we are all guilty of that, lol,

Yes, it's Auto.
It's really not smooth.
any idea ?

Can tuning detect if transmission got problem ?
Thanks

Auto tran's need to be services roughly once a year

maybe a vacuum pipes come off or broken

What happens is when you changed the oil the new oil is thinner so you need to tune the trans

I was wondering can we use Dexron III on our car ? as the manual said Dexron II

[quote="matt4u"]What happens is when you changed the oil the new oil is thinner so you need to tune the trans[/quote]

"Tune the trans".... please do go on

[quote="sitnalm"]I was wondering can we use Dexron III on our car ? as the manual said Dexron II[/quote]

You'll have to check with Mazda mate unless anybody else knows........ different oil for different tranmissions etc etc

Thanks all