The ignition module sits inside the distributor.
| Attachments: |
|
BG Ign module jpg2.jpg [ 112.01 KiB | Viewed 856 times ] |
| Club323F http://www.club323f.com/forum/ |
|
| BG distributor http://www.club323f.com/forum/viewtopic.php?f=58&t=61878 |
Page 1 of 1 |
| Author: | strathmore22 [ Fri Jun 26, 2026 8:42 am ] |
| Post subject: | BG distributor |
Hi. I'm needing a new distributor for my BG GLX1 ABS AUTO. Can anyone please help? |
|
| Author: | strathmore22 [ Sun Jun 28, 2026 7:55 am ] |
| Post subject: | Re: BG distributor |
strathmore22 wrote: Hi. I'm needing a new distributor for my BG GLX1 ABS AUTO. Can anyone please help? The car occasionally fails at starting or soon afterwards. The starter motor works but the engine does not, although after a while it will re-start again. Could this be something else rather than the distributor itself? I would be grateful if anyone has similar experience or can make any suggestions.
|
|
| Author: | jinglebells [ Tue Jul 14, 2026 10:20 am ] |
| Post subject: | Re: BG distributor |
You probably need only the ignition module, but they are hard to find. Care - there may be a difference between the carburettor model (1989=-1991) and the injection model (1991-1994) which yours is. For my carb model the part number was 9.4073. Have you tried ebay or a scrap yard? |
|
| Author: | strathmore22 [ Tue Jul 14, 2026 11:27 am ] |
| Post subject: | Re: BG distributor |
Thanks for that. I am expecting an engineer to diagnose the problem today. By ignition module do you mean the distributor? I believe these can be reconditioned. |
|
| Author: | jinglebells [ Tue Jul 14, 2026 5:00 pm ] | ||
| Post subject: | Re: BG distributor | ||
The ignition module sits inside the distributor.
|
|||
| Author: | strathmore22 [ Tue Jul 14, 2026 8:11 pm ] |
| Post subject: | Re: BG distributor |
Thanks again. The engineer visited today but naturally the car worked perfectly. I have to tell him when it fails and he will come asap. |
|
| Author: | strathmore22 [ Thu Jul 23, 2026 5:56 pm ] |
| Post subject: | Re: BG distributor |
strathmore22 wrote: Thanks again. The engineer visited today but naturally the car worked perfectly. I have to tell him when it fails and he will come asap. Re BG distributor. Using the car's diagnosis system it came back with engine water temperature sensor faulty. The engineer said these items were no longer available but I bought a new one from Amazon and fitted it myself. Early tests show no problem.
|
|
| Author: | strathmore22 [ Thu Jul 30, 2026 9:54 am ] |
| Post subject: | Re: BG distributor |
After 100 miles car is still working well, thanks to God and the Mazda diagnosis system. |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|