| Club323F http://www.club323f.com/forum/ |
|
| seat brackets http://www.club323f.com/forum/viewtopic.php?f=4&t=58366 |
Page 1 of 1 |
| Author: | NorwegianSl33per [ Fri Oct 17, 2014 12:40 am ] |
| Post subject: | seat brackets |
So i bought some OMP ASR bucket seats to replace the 323gtr ones in hope of a tighter and lower seating position...only problem is i tried my best to get the original floor gliders in place (since i want to be able to move back and forth. Even tho i drilled the new seat brackets to get the mounting point as low as possible, im still to high up and the offset original mounting spots are a real pain in the ass to allign Anyone got some tips on premade seat mounts for racing seats with gliders, or is it swearing time and breaking out the welder ? |
|
| Author: | andym323 [ Sat Nov 01, 2014 10:09 pm ] |
| Post subject: | Re: seat brackets |
I have same problem mate, I fitted a Recaro Ergomed some years ago and I built my own mounting rails out of 25mm box and bar, no welding in my case. Mine's mounted as low as it will go but it still sits a little too high!! Unless the seat manufacturer makes specific adapters I'm afraid you're only choices are modifying a universal set or building your own. |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|