It [i]could[/i] be a carbon filter - there's a couple I think, the main one being on the right hand side of the bulkhead low down.
If you had an EPC you could find out
Mark
| Club323F http://www.club323f.com/forum/ |
|
| Help please?! #;o) http://www.club323f.com/forum/viewtopic.php?f=3&t=5504 |
Page 1 of 1 |
| Author: | fil_auto [ Wed Sep 28, 2005 1:09 pm ] |
| Post subject: | Help please?! #;o) |
Hi guys - can anyone tell me what this is as I need a new one! The little black plastic pot that's just on the left of mani. Thanks in advance - Phil [img]http://www.k-p.co.uk/fil_auto/little_placky_pot.jpg[/img] |
|
| Author: | Lantis [ Wed Sep 28, 2005 1:16 pm ] |
| Post subject: | |
i really have no idea why ya need a new one for??? wot wrong with dat one? i can grab one from the scrappy cos im finking of going there not sure when but i need to anyways |
|
| Author: | fil_auto [ Wed Sep 28, 2005 1:20 pm ] |
| Post subject: | |
Excellent Lantis - thats an option then but I'd like it sooner rather than later! Thinking about it a little more I reckon it might be some sort of breather tank?! Anyways, in answer to your question - look a little closer at where the red pipe joins ( or doesn't as the case is! ) the blak pot! Cheers Phil. |
|
| Author: | Mark.T [ Wed Sep 28, 2005 3:43 pm ] |
| Post subject: | |
It [i]could[/i] be a carbon filter - there's a couple I think, the main one being on the right hand side of the bulkhead low down. If you had an EPC you could find out
Mark |
|
| Author: | fil_auto [ Wed Sep 28, 2005 4:24 pm ] |
| Post subject: | |
[quote="Mark.T"]It [i]could[/i] be a carbon filter - there's a couple I think, the main one being on the right hand side of the bulkhead low down. If you had an EPC you could find out Mark[/quote] Thank you Mark! I'm in the process of obtaining one those fab EPC's! Anyone else know? Cheers Phil. |
|
| Author: | stuartspel [ Wed Sep 28, 2005 5:18 pm ] |
| Post subject: | |
|
|
| Author: | Drake [ Wed Sep 28, 2005 7:10 pm ] |
| Post subject: | |
looks like it could be a vacuum chamber... 
[img]http://img.photobucket.com/albums/v355/drake83/1.jpg[/img] |
|
| Author: | fil_auto [ Thu Sep 29, 2005 9:27 am ] |
| Post subject: | |
Fantastic! Thank you dude...... and I think you just could be right! ttfn Phil #;o) PS: do I take it that this is the part no that I may require: BPD-20-339 ?? |
|
| Author: | Drake [ Thu Sep 29, 2005 10:14 am ] |
| Post subject: | |
No probs mate, part code is BPD3-20-339...
later Andy |
|
| Author: | fil_auto [ Thu Sep 29, 2005 10:36 am ] |
| Post subject: | |
Fantastic, funny and annoying at the same time! Imagine this - phone Mazda - none in stock, none at Mazda, go on back order and 45 + VAT!!! Yeah right - what f**kin planet are these guys on! Anyone going to a scrappy soon! I need one of these ASAP. Think I best make some enquiries today. Thanks guys.... Phil |
|
| Author: | Shaggy [ Thu Sep 29, 2005 7:29 pm ] |
| Post subject: | |
I might be able to help tho im not at my garage for a few days phil 
if i was u id look at the cars on ebay that are being broken up, there are a few on there 
|
|
| Author: | Smotter [ Fri Sep 30, 2005 8:58 am ] |
| Post subject: | |
You should remove your broken vacuum thingy and get a mate to give you a lift to a local scrappy. Then wander around all the Mazda's in the yard 'till you find a simular item ????? |
|
| Author: | fil_auto [ Fri Sep 30, 2005 9:10 am ] |
| Post subject: | |
Cheers guys - shall make some enquiries ASAP. #;o) Phil |
|
| Author: | fil_auto [ Wed Oct 12, 2005 10:35 am ] |
| Post subject: | |
Just an update. Done, delivered, sorted and fitted for £23.50! Nice! Replacement part from Mazda Spares scrappy - Rochdale #;o) ttfn Phil |
|
| Author: | fil_auto [ Wed Oct 12, 2005 10:36 am ] |
| Post subject: | |
Oh yeah! Apart from the Mazda dealer ( near me ) having none in stock no idea when they would have. Would have been something like 43.50 + VAT.. ... yeah right! L8rs Phil. |
|
| Author: | Smotter [ Wed Oct 12, 2005 10:42 am ] |
| Post subject: | |
All's well that ends well !!! Great stuff
|
|
| Author: | Lantis [ Thu Oct 13, 2005 2:16 am ] |
| Post subject: | |
hey is the valve solenoid important???!!! cos i was fixin my FSE the rite way up again instead of upside down like u saw phil and Co but i tried to take off one of the hoses cos it was too short and then i snapped it!!!!!! i had a look at the problem and then saw i had snapped off where it was suppose to be connected but then yanked off the top and underneath there was another insert which now i have used to connect to the FSE. so far iv been runnin like this for about 2 weeks and no problems but i want to make sure that its fine to do so. just feels like the power is abit funny now. 
|
|
| Author: | fil_auto [ Thu Oct 13, 2005 9:43 am ] |
| Post subject: | |
Lantis - I'm not sure what it does, all I know is that it was broke!... and I think it happened at around the time I was fitting my FSE, we got rounf it temporarily with some superglue but it snapped again a couple of weeks ago! It's a vacuum chamber that links to the manifold and there's defo suction being lost it its not connected. I too think it affected power but more likely consumption and idling?! Anyways, feels a bit better now.... maybe just piece of mind that its as it should be?! Anyone else actually know what its for / what it does / doesn't do?! ttfn Phil 
|
|
| Author: | Drake [ Thu Oct 13, 2005 12:01 pm ] |
| Post subject: | |
Had a quick look for ya, found this - http://www.autoglossary.com/index.php?t ... &interms=1 There may be something in here too - http://www.innerauto.com/Automotive_Definitions/ Bit busy at work so can't have a proper look right now...
|
|
| Author: | fil_auto [ Thu Oct 13, 2005 12:13 pm ] |
| Post subject: | |
Top man! Thanks buddy #;o) |
|
| Author: | Lantis [ Sat Oct 15, 2005 1:18 am ] |
| Post subject: | |
yo phil yea man got the same prob but i didnt superglue it bak... instead i took off the top section of that thing and underneath it revels another pipe!!!! so im not sure it everything is fine but so far so good i hope!! |
|
| Author: | fil_auto [ Mon Oct 17, 2005 10:21 am ] |
| Post subject: | |
Cool, good news! #;o) |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|