| Club323F http://www.club323f.com/forum/ |
|
| Upgrade rear brakes to discs from a 323f Bj 1.8 http://www.club323f.com/forum/viewtopic.php?f=21&t=61273 |
Page 1 of 1 |
| Author: | alex_new [ Fri May 15, 2020 10:36 am ] |
| Post subject: | Upgrade rear brakes to discs from a 323f Bj 1.8 |
Hello, I want to upgrade my rear drums of my 323f ba '94 to discs. I found one complete suspension rear system from a 323 bj '98 1.8 that using rear discs 261mm 4x100. Teey are 10mm bigger than the std 251mm of ba v6 / mx3 setup. Did someone tried this solution? Except the rear cross subframe all the others seems identical in shape (trailing arms - hubs - steering knuckles) Regards, Alex |
|
| Author: | jinglebells [ Wed Jul 22, 2020 8:23 pm ] |
| Post subject: | Re: Upgrade rear brakes to discs from a 323f Bj 1.8 |
Hi, Personally I wouldn't want to try putting any BJ suspension onto a BA. They are very different cars. It's possible the BA V6 discs could be made to fit, but the carriers are very different. It could be a hard job. I think there is a member on here that put V6 front disks on the front of a 1.5, but that would also be a lot of work. Is there a problem with the rear drums you have? They normally work OK. |
|
| Author: | maZZda [ Wed Jul 22, 2020 8:47 pm ] |
| Post subject: | Re: Upgrade rear brakes to discs from a 323f Bj 1.8 |
I personaly did the V6 rear disks and they look nice. I say look nice as they give only one benefit, they don't fade after 10 hard brakes.. If you drive normaly, they didn't make any difference. Disks from a BJ would want their own hubcarriers because of the larger ofset. This could lean to bad thing as i belive that the shock "boot" is with different dimentions.. So you could end with changing and the suspension wich could not fit.. and then it will be a headache.. Find a V6 and get the hubcarriers with the brakes and you're done. |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|