Or you could just stick it back on like we did. You can buy the sticky number plate fixing pads from Halfords
| Club323F http://www.club323f.com/forum/ |
|
| Front Number Plate Mount http://www.club323f.com/forum/viewtopic.php?f=19&t=39403 |
Page 1 of 1 |
| Author: | bluearmylcfc [ Sun May 02, 2010 7:07 pm ] |
| Post subject: | Front Number Plate Mount |
I'm thinking of removing the black number plate surround off of my car, but am just wondering whether there is any modification involved in doing this, any holes revealed behind the surround itself etc... Brad |
|
| Author: | Dominic [ Mon May 03, 2010 8:46 am ] |
| Post subject: | |
i have done this myself the black plate is held on by 2x10mm screws. you will need to re drill the number plate to fit them holes |
|
| Author: | Debz [ Mon May 03, 2010 9:01 am ] |
| Post subject: | |
Or you could just stick it back on like we did. You can buy the sticky number plate fixing pads from Halfords
|
|
| Author: | stuartspel [ Mon May 03, 2010 9:23 am ] |
| Post subject: | |
One of the first ever things I did to my F was remove the black surround  Like Dom and Debz say, either re-drill the plate to fix it directly to the bumper or stick it on with pads 
|
|
| Author: | HughieW [ Mon May 03, 2010 9:23 am ] |
| Post subject: | |
Yep I'm width Debz on this one  "number plate adhesive" or "double sided tape that is slightly overpriced but possibly a bit stronger" as I like to call it!
|
|
| Author: | Debz [ Mon May 03, 2010 9:32 am ] |
| Post subject: | |
Yeah thats the stuff Hughie 
|
|
| Author: | bluearmylcfc [ Mon May 03, 2010 11:50 am ] |
| Post subject: | |
Yeah this is what i was looking into doing, no more screw holes
Thanks everybody. Brad |
|
| Author: | stuartspel [ Mon May 03, 2010 12:34 pm ] |
| Post subject: | |
I have always been a fan of screw on rather than stick on, mainly as I always wanted to swap plates at shows etc. The plastic number plate screws are the same thread (M6x1) as the bolts holding the surround on too
Some random pic I found… [img]http://i14.photobucket.com/albums/a335/stuartspel/Plate-17.jpg[/img] |
|
| Author: | Mazda_MickMagoo88 [ Sun Sep 05, 2010 11:56 pm ] |
| Post subject: | |
looks better without number plate surround now you can have an arra of number plates of an size
|
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|