My one of my screenwashers doesnt appear to be working, the motor appear to be fine (dont appear to be making obscure noises etc) but i think there might be a hole in the tubing or a blockage of some sort in the tube.

How do I get the screenwashers out? There appears to be a big kind of casing under the bonnet. I'll need that off. Not got a clue how to do it though. Any help?

You could try using a pin on the end of the washer jet. It won't hurt it and may just displace the limescale that appears to be blocking the jet.

Is it the back washer?!


I had that problem and couldn't fix it with the 'pin' method and eventually had to take it to the dealers to have then take a look at it.....


Turns out that the back washer has a seperate resevoir under the floor of the boot on the driver's side....!

Its the front passenger side jet.

Tried cleaning with the pin, again no luck.

Anyone know how that frame under the bonnet comes off so i can get stuck into the thing?

If your referring to the grey looking blanket, underside of the bonnet ( heat absorbent, I think )

Mine's held in with loads of plastic pins all the way round, just have to prise them off. you can then get to the pipes for the squirters.

ttfn

Phil

How does it go back on?

Want to make sure before i pull it off.

poke the clips back in the holes!

They are just like grommit type things i think.