| Club323F http://www.club323f.com/forum/ |
|
| Dizzy Probs - hmmm http://www.club323f.com/forum/viewtopic.php?f=18&t=5791 |
Page 1 of 1 |
| Author: | GOGOBROOM [ Sun Oct 16, 2005 11:02 pm ] |
| Post subject: | Dizzy Probs - hmmm |
As many of you are probably aware some strange things have been happening to my engine this last year - anyway I started her up today, not been run for a week, and had a look under the bonnet there is a constant spark I can see coming from below the Dizzy cap - which is more prominent when revved - This is not right, of that i am sure. Well it was too dark to have a proper probe around so thought I would ask for suggestions before having it all apart tomorrow. In the last 3 months I have fitted new Spark leads, so I doubt it is them. Could it be that the Cap has a hairline crack or something ? Any suggestions are greatfully received. Also would this give a loss in power ? |
|
| Author: | andym323 [ Sun Oct 16, 2005 11:58 pm ] |
| Post subject: | |
I'd say yes and yes mate, best av it off should be able to see from inside
|
|
| Author: | Mark.T [ Mon Oct 17, 2005 11:37 am ] |
| Post subject: | |
I'd say yes and yes as well
Mark |
|
| Author: | GOGOBROOM [ Mon Oct 17, 2005 12:22 pm ] |
| Post subject: | |
thought as much cheers - - luckily I have a spare V6 sat down my drive - so first thing would be to swap over the dizzy cap - and see if it makes a difference
|
|
| Author: | stuartspel [ Mon Oct 17, 2005 12:52 pm ] |
| Post subject: | |
....just one [b]YES[/b] needed this time....! |
|
| Author: | GOGOBROOM [ Mon Oct 17, 2005 8:05 pm ] |
| Post subject: | |
hehe - changed over the dizzy cap from my New V6 to my Silver one - and guess what ...... one of the bleeding cables was shot - the metal bit at the end had seperated from the HT lead - I only fitted these new about 4 months ago .... - So I put a new lead on and changed over the caps, hey presto no spark on outside lol .... didnt get chance to testdrive tonight but engine sounded better. When I put the Dizzy back on the New V6 then I will see if it was also the cap that was at fault or just the lead. |
|
| Author: | Mark.T [ Tue Oct 18, 2005 8:08 am ] |
| Post subject: | |
Good news
Mark |
|
| Author: | Stuart McB [ Tue Oct 18, 2005 8:28 pm ] |
| Post subject: | |
Easy repair, and cheap too. |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|