Idle Should be around 750rpm- Or so I was always lead to believe...................
| Club323F http://www.club323f.com/forum/ |
|
| Tappets and Idle Tickover Speed on 1.5i... http://www.club323f.com/forum/viewtopic.php?f=18&t=4383 |
Page 1 of 1 |
| Author: | pk1 [ Mon Jul 11, 2005 5:06 pm ] |
| Post subject: | Tappets and Idle Tickover Speed on 1.5i... |
I've had a 323f 1.5 GXi for about a month now, and am planning on servicing it soon. Will it have hydraulic lifters and do they need any attention? Secondly whats the idle speed on yours?? mines from 650rpm - 900rpm and revs erractically at tickover, is this normal and how's it adjusted? cheers |
|
| Author: | JAM [ Mon Jul 11, 2005 5:14 pm ] |
| Post subject: | |
Idle Should be around 750rpm- Or so I was always lead to believe...................
|
|
| Author: | Shaggy [ Mon Jul 11, 2005 5:49 pm ] |
| Post subject: | |
How many miles has she done? I few engines on here that have 120K or so and are tapping. whats the oil like? blue smoke? Yes the taps are hydraulic Ben |
|
| Author: | pk1 [ Mon Jul 11, 2005 6:00 pm ] |
| Post subject: | |
the tappets arent tapping yet was just wondering if the hydraulic ones still need adjusting? cheers |
|
| Author: | Shaggy [ Mon Jul 11, 2005 6:02 pm ] |
| Post subject: | |
no they will be ok, if it aint bust....... 
|
|
| Author: | Stuart McB [ Mon Jul 11, 2005 7:56 pm ] |
| Post subject: | |
Don't think you can adjust the 323's hydraulic tappets. Its the oil that does the work. A good quality semi synth oil (10X40w ?) will help. As for the tick over my 1.8 is about 750 to 800 on the clock but drops alittle when the A/C in on. |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|