my aerial seized up a while ago so i bought a replacement, only problem is mine is pre ford and the replacement is post ford, i have 3 wires to connect and 6 pins on the aerial to choose from, could anybody please help with what should go where, maybe a picture of the connector block or a diagram would be handy. cheers

on the post ford
blue is permanent feed
pink is up and down feed
black is negative
hope that helps

aerial pin layout is
x x
x

x
x x

i know which wire is which, but i need to know which pin on the aerial each goes to as in the diagram above

fitted today and works a treat, i took the circuit board out of the aerial and checked what the pins were labelled as on the back then crimped a connector on each wire and connected straight on to the pins.
if anybody else ever needs to fit a post ford aerial to a pre ford car this is the layout.

gnd x
x

stereo
b+ x


gnd=black
stereo=pink
b+=red/blue