Club323F
http://club323f.com/forum/

Induction kits
http://club323f.com/forum/viewtopic.php?f=54&t=37190
Page 1 of 1

Author:  operaghost [ Sun Jan 17, 2010 3:52 pm ]
Post subject:  Induction kits

Hi all,

Want to do something nice for my old BG when she's finally on the road, and thought of an induction kit.

I know the best ones are going to be the K&N or Pipercross kits, but what are the universal ones that crop up on ebay like? I know they are a lot cheaper, but would they be of any use at all, or would I be better sticking to the standard air filter and saving up a bit longer?

An example of the sort of kit I mean is below.

http://cgi.ebay.co.uk/INDUCTION-KIT-AIR-FILTER-2-3-5-6-RX-8-CX-7-MX-5-323-626_W0QQitemZ350268417222QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item518d9fe4c6

Anyone any thoughts or experiences?

Thanks.[/url]

Author:  Marc S [ Mon Jan 18, 2010 11:35 am ]
Post subject: 

That big cone filter won't fit, it'll sit against the bodywork, and when it rains water will get on it...

You can make a kit from ebay parts easy enough, but if you just want to stick a filter on the end of what you have, you need something smaller. A foam mushroom type (very cheap), or the K&N (very expensive)

I made this for the GT, all for less than a K&N filter ;)

Image

Author:  bullit [ Tue Jan 26, 2010 1:45 am ]
Post subject: 

marcrs! wat sizeis the blue piping is it as iv wanted to that to mine for ages n how much?

Author:  Marc S [ Tue Jan 26, 2010 8:46 am ]
Post subject: 

I've just sold the set I had for sale...

3" diameter elbow. 3"-2.5" reducer elbow, and 3"-2.75" reducer, coupled with 3" dia ali pipes, both about 4" long, the top one with an outlet for the idle control valve

http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 0299246260

http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... K:MEWAX:IT

http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... K:MEWAX:IT

Author:  bullit [ Fri Jan 29, 2010 1:38 am ]
Post subject: 

cheers marcrs ill get on it
shame i bloody missed the ones u ad for sale

Author:  Westy99 [ Sat Jan 28, 2017 11:16 pm ]
Post subject:  Re: Induction kits

Marc S, hi how's it going just saw your post on your own made induction kit/air filter any chance you could share it with me I have a 1.6 16v 323f pop up light one

Page 1 of 1 All times are UTC [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/