BA - Lucas 323F Touring Kit A-Spec 1.8 BP *Photos - Page 4*

**Posted:** Sun Jan 05, 2014 10:25 pm

LPG since 98? Very nice. Do you have any valve care? Like lubrification?

**Posted:** Sun Jan 05, 2014 11:23 pm

Nope, I have only KOLTEC III gen LPG without any special addons

**Posted:** Thu Jan 29, 2015 11:26 am

Some new photos

[img]http://www.mazdaspeed.pl/forum/download/file.php?id=51102&mode=view[/img]
[img]http://www.mazdaspeed.pl/forum/download/file.php?id=51101&mode=view[/img]
[img]http://www.mazdaspeed.pl/forum/download/file.php?id=51103&mode=view[/img]
[img]http://www.mazdaspeed.pl/forum/download/file.php?id=51100&mode=view[/img]
[img]http://www.fotoszok.pl/upload/cebbe52a.jpg[/img]

I've resprayed lamps inside to black matt, and also I've installed Xenon 4300K set and lamp washers set

**Posted:** Sat Feb 21, 2015 10:33 pm

another two photos of headlights
[img]http://www.mazdaspeed.pl/forum/download/file.php?id=56981&t=1[/img]
[img]http://www.mazdaspeed.pl/forum/download/file.php?id=56979&t=1[/img]

And new interior light by my concept

[img]http://www.fotoszok.pl/upload/3a85784c.jpg[/img]
[img]http://www.fotoszok.pl/upload/3e3577fa.jpg[/img]

**Posted:** Sun Feb 22, 2015 3:00 pm

Cool head light mod

**Posted:** Sat Sep 12, 2015 2:15 pm

We're swapped engine to 1.8 BP so some actual photos

[img]http://www.mazdaspeed.pl/forum/download/file.php?id=84225&mode=view[/img]
[img]http://www.mazdaspeed.pl/forum/download/file.php?id=84227&mode=view[/img]
[img]http://www.mazdaspeed.pl/forum/download/file.php?id=84228&mode=view[/img]
[img]http://www.mazdaspeed.pl/forum/download/file.php?id=84229&mode=view[/img]
[img]http://www.mazdaspeed.pl/forum/download/file.php?id=84226&mode=view[/img]

**Posted:** Sun Sep 13, 2015 6:49 pm

Very nice! Are you happy with the swap?

**Posted:** Sun Sep 13, 2015 7:46 pm

I'm glaad you sorted it out! How is the POWER output now? :badgrin:

**Posted:** Mon Sep 14, 2015 5:21 pm

[quote="HMT"]Very nice! Are you happy with the swap?[/quote]
Yep, car is more powerfull then before swap, but my Z5 was dissassembled and it was totally crap, there weren't anything to repair, so engine went to scrap-heap.

[quote="maZZda"]I'm glaad you sorted it out! How is the POWER output now? :badgrin:

[/quote]

I don't know yet, I want to go to dyno but now I haven't money because swap

When I go to dyno I think I could upload info what power I have because there I have Cold Air Intake and modified exhaust so maybe I have some extra hp? :roll:

And there is sound of my exhaust

if you listen well on beggining, there is fine sound of my CAI like turbocharger or something like this
[youtube]UBeWd6Gz0SU[/youtube]

**Posted:** Mon Sep 14, 2015 8:35 pm

I like the exhaust note. Watch you oil levels by the way

**Posted:** Mon Sep 14, 2015 8:46 pm

I've bought overhauled engine (i don't know is that good word - my engine just have new
head gasket, motor head, everything parts in engine are new, oil consumption = 0, I have Valvoline SynPower 5w40 Synthetic Oil, compression is ~14bar at every cylinder) so I think I could haven't problems with this engine

**Posted:** Mon Sep 14, 2015 9:05 pm

Reving it higher ALWAYS eat oil!!! It doesn't mather new,old,overhauled....

**Posted:** Mon Sep 14, 2015 9:19 pm

It was only few seconds, only for video, normally I use RPM's from 2000 to 4000

**Posted:** Mon Sep 14, 2015 9:25 pm

**Posted:** Thu Oct 22, 2015 4:29 pm

We have in Poland a saying: "Polish golden autumn", so I have some photos in these climates

[img]http://www.mazdaspeed.pl/forum/download/file.php?id=88339&mode=view[/img]
[img]http://www.mazdaspeed.pl/forum/download/file.php?id=88334&mode=view[/img]
[img]http://www.mazdaspeed.pl/forum/download/file.php?id=88333&mode=view[/img]
[img]http://www.mazdaspeed.pl/forum/download/file.php?id=88337&mode=view[/img]
[img]http://www.mazdaspeed.pl/forum/download/file.php?id=88335&mode=view[/img]
[img]http://www.mazdaspeed.pl/forum/download/file.php?id=88336&mode=view[/img]
[img]http://www.mazdaspeed.pl/forum/download/file.php?id=88338&mode=view[/img]
[img]http://www.mazdaspeed.pl/forum/download/file.php?id=88340&mode=view[/img]
[img]http://www.mazdaspeed.pl/forum/download/file.php?id=88341&mode=view[/img]
[img]http://www.mazdaspeed.pl/forum/download/file.php?id=88343&mode=view[/img]
[img]http://www.mazdaspeed.pl/forum/download/file.php?id=88342&mode=view[/img]

**Posted:** Fri Oct 23, 2015 11:30 am

Hahaha, nice plaster dude

**Posted:** Fri Oct 23, 2015 12:03 pm

I had small accident and there is hole, where my finger fits so I bought that sticker

Because I will repair it later because no money

**Joined:** Fri Oct 02, 2015 4:12 pm **Posts:** 4

Hey guy I'M FROM Barbados. When you did the swap did you have to change the harness as well?

**Posted:** Sun Apr 17, 2016 10:03 pm

I didn't post any updates for long time :oops:

We've installed STAG 300-4 Plus LPG, and I mounted speakers (GMS 1765N with tweeters) to front doors and chrome handles from mazda 626

And I sold out my MX3 and bought MX5 Nb

Two photos from winter:
[img]http://www.streetlight.pl/hosting/imgs/58088_image.jpeg[/img]
[img]http://www.streetlight.pl/hosting/imgs/43796-image.jpeg[/img]

and my miata

[img]http://streetlight.pl/hosting/imgs/33467_DSCN1082.jpg[/img]

Forum rules - Please read!

BA - Lucas 323F Touring Kit A-Spec 1.8 BP Photos - Page 4

Who is online